HP LaserJet 1200/1300 Blinking Оrange Light Error - SOLUTION
HP LaserJet 1200/1300 Blinking Оrange Light Error - SOLUTION
When the orange light on your HP LaserJet 1200/1300 printer is blinking, it indicates that there is an error or issue with the printer. Here are some steps you can take to try to resolve the issue:
Check the toner cartridge: The first step is to make sure that the toner cartridge is installed correctly and that it has not run out of toner. You can try removing the toner cartridge and shaking it gently to redistribute the toner. If the cartridge is low on toner, you may need to replace it.
Check for paper jams: Another common cause of the blinking orange light is a paper jam. Open the printer and check for any paper that may be stuck in the printer. If you find any paper, carefully remove it.
Check the printer cable: Ensure that the printer cable is properly connected between the printer and your computer. Try unplugging and re-plugging the cable to ensure a secure connection.
Restart the printer: Turn off the printer, unplug it from the power source, and wait for a few minutes. Then plug it back in and turn it on again.
Reset the printer: If none of the above steps work, you can try resetting the printer. To do this, turn off the printer, press and hold the "Go" button, and turn the printer back on while still holding the "Go" button. Keep holding the button until the orange light stops blinking and the printer starts up again.