How to Fix a Tumble Dryer Belt on a Beko Dryer (Drive Belt and Pulley Fixed)
For all your tumble dryer drive belts and pulleys go to:
If your dryer motor is running, but the drum is not turning it is likely the belt has broken. Mat shows how to change the belts and pulley on a Beko dryer. If your Beko dryer only has one belt please see our other video:
Want to skip straight to the information you need? Here's what we talk about in each part of our video:
0:00 Introducing the issue
0:30 Remove the top, side panel and back heater cover screws
0:47 Suggested video: How to Replace the Belt on a Beko Tumble Dryer
1:02 Take note of the different screws
1:56 Use a separate container for the heater cover screws so they don't get mixed up
2:15 Remove the motor fan
2:37 How to replace the large drive belt
3:02 How to replace the small belt or drive pulley
3:12 Separate the rear of the tumble dryer from the front and remove the water container
3:24 Remove the top tumble dryer support and control panel screws
3:55 Remove the bracket screws
4:12 Remove the screws that hold the drawer and pipes in place
4:24 Unclip the pipes from the cabinet
5:07 Remove the drawer and old belt
5:29 Disconnect the electrical connections from the back of the dryer
6:29 Remove the side cabinet and back panel screws
6:54 Remove the back panel and drum
7:33 Remove the tension spring, fan cover and electrical connections from the motor
8:05 Lift the motor out
8:24 Release the small belt and pulley
8:51 Fit the new pulley, circlip and small belt
9:26 Refit the motor
10:18 Reattach the rear panel, drum assembly and large drive belt
11:02 Screw the back panel and top bracket
11:13 Reconnect the electrical wires
11:54 Reattach the water container and pipes
12:12 Screw the control panel back on
12:33 Fit the large belt to the pulley
13:02 Reattach the heater cover, fan, side panels and the top lid
13:48 Suggested video: Energy Saving Tips For Your Washing Machine
13:51 Suggested playlist: Appliance maintenance videos