Rusty Jacking Point Repair Guide | How To Weld Rust Hole in Rocker Panel Sill | BMW E30 Build | 018
Rusty Jacking Point Repair Guide | How To Weld Rust Hole in Rocker Panel Sill | BMW E30 Build | 018
This BMW E30 build project video is a continuation of the previous, although this time I repair a rust hole in the E30 rocker panel (or sill), which is incidentally right where the jacking point is.
Here's what I use in this video:
Clarke Weld MIG 150 TE Turbo: (this is the newer version)
Obviously, the integrity of the jacking point on your project car is pretty important for safety, and to avoid accidents that might take the project backwards, so once it was discovered as a rust problem, it quickly became high on the list of priorities.
Previously I'd found that the car had rusted from the inside where the rear driver's side jacking point is, and it was quite a bit worse than what I could see on the surface. I cut it all out and welded up the inner chassis rail box section leaving me with a rectangular window into the rocker panel area.
Inside the rocker panel, above where the rear jacking point is situated, there is effectively a tower pressed into the chassis rail, which reaches all the way down to the actual jacking pad you lift the car from. This is to give is reinforcement and prevent the rocker panel sheet metal from collapsing when the car is jacked up.
I extended this tower in quite a crude way and then cut out a repair panel from flat sheet metal. I then used a hammer and my vice to get the correct bends and curves, including the curve which gives clearance for that tower.
With it all welded in, and even the jacking pad reinforcing plate welded on and looking OE, I'm again very happy with how the E30 project is going.
I'm 100% confident in my jacking point repair here, and would not have any concerns about jacking the car up from this point whatsoever, it's most certainly factory strong, maybe even stronger now. And from a cosmetic standpoint, it looks pretty factory too, with all the right shapes in the right places.
For more helpful how-to guides and restoration project logs, visit our blog:
As an Amazon Associate, Ebay Partner and Awin Affiliate, we earn a small commission from qualifying purchases. Some of our links are affiliate links, and if you decide to purchase things through them, we earn a small commission. It costs you nothing but helps us to keep the content coming. Thanks for your support!