The washing machine needed repair because it began to bounce. Replacing the shock absorbers in this case will solve the problem. To repair your washing machine, check that the drum bearings and tank dampers are in good working order. Shock absorbers (dampers) of the washing machine are designed to dampen the vibrations of the tank during operation. They are located at the bottom of the machine and work like car shock absorbers. Over time, they wear out and cease to perform their function. Therefore, if you began to suspect that the washing machine began to vibrate more than usual or there were loud knocks when the drum rotates, it is possible that you already need to replace the shock absorbers, as they cannot be repaired. Before starting work, be sure to disconnect the machine from the AC mains, as well as turn off the water supply with a faucet. Inspect the machine. If it has a special hatch at the back for access to the interior, then disassembly should begin with it. If it is not possible to replace the shock absorbers of the washing machine through the rear roof, you can turn it on its side and replace it from below.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Sections of the video (chapters):
0:00 New Washing Machine Shock Absorbers
0:14 How to check the shock absorbers
1:11 Removing the old shock absorbers
2:22 Installation of new shock absorbers
4:47 Checking the new shock absorbers
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video you will see High Pressure Washer Repair
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our channel "DIY-no words" #diynowords and watch videos on this topic #washingmachine #washingmachinerepair #diy #repair #washer #howto #fix #kenmore
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel at the links: