This is a Repair and Return Service of your ESP/ABS Module You will need to remove and send your module to us for repair
Common Failures:
•Fault code 5001 (C1001-5001) there is an internal fault in control unit ‘N30/4 (Electronic Stability Program control unit)’.
•5905 Control Unit N47-5 (ESP control unit), internal fault
•5906 Control Unit N47-5 (ESP control unit), internal fault
•5944 Control Unit N47-5 (ESP control unit), internal fault
•5945 Control Unit N47-5 (ESP control unit), internal fault
Failure Symptoms:
•Steering becomes heavy after driving 20km/h or faster
•EBD, ABS, ESP inoperative See owner’s Manual
•Run Flat indicator inoperative
•Power steering malfunction See Owner’s Manual
Availability:
All parts needed for this repair are in stock.
Turnaround Time:
The Same Day Repair
Software Reload/Coding Required?
No. Plug and Play
This is a Repair and Return service of your existing Electronic Stability Program (ESP) ABS control module and the ABS Pump
You will need to remove and send your module and pump to us for repair.
Please Note: When shipping your ESP and pump in please ensure to package it properly. Place the ESP and pump together in a thick plastic bag due to the amount of fluid saturating the modules. If the fluid saturates the box, this will cause the box to break and could cause delays or even possibility of loss when shipping to our facility. Because the part is heavy, we recommend packaging with lots of protection (bubble wrap, packing peanuts, etc.) avoiding any movement in the box to prevent damages. Not following these instructions could result in additional fees, damages or even loss of the part. It is the sole responsibility of the shipper if any of these events occur when sending the part to ECUTech